Installation mode of Solar street lamp
1, determine the position of the lamp, if the surface of the Earth 1.2-meter are soft soil, then the excavation depth should be deepened; at the same time to confirm that no other facilities (such as cable, pipe, etc.), the top of the street lamp does not have a long time shading objects, or to replace the location.
2, in the position of the lamp set aside (excavation) in line with the standard pits (according to the height of the lamp rod design depth); The embedded part is placed in the middle of the square pit, and the PVC threading tube is placed in the center of the embedded part and the other end is placed in the storage place of the storage battery. Note that the embedded parts, the foundation and the original ground on the same level surface (or the top of the screw and the original ground on the same level, according to the site needs), one side to be parallel with the road; Then with C20 concrete pouring fixed, the pouring process must keep shaking with shaking rods, to ensure the overall compactness, firmness.
3, the completion of the construction, timely clean-up of residual mud residue on the plate, and the use of waste oil to clean the bolts of impurities (can be before the construction of the bolt position with tape to prevent too many magazines attached to this, affecting the installation progress).
4. During the solidification process of the mixed soil, the water should be watered regularly and the concrete will be completely solidified (more than 72 hours) before the chandelier can be installed.
Advantages of Solar Street lamps
1. Energy-saving: Solar photovoltaic conversion to provide electricity, inexhaustible;
2. Environmental protection: No pollution, no noise, no radiation;
3. Safety: No electric shock, fire and other accidents;
4. Convenience: Installation of simple, do not need to rack or "cut the belly" digging ground construction, nor power blackouts worry;
5. Long life: High scientific and technological content of products, control systems, accessories are international brands, intelligent design, reliable quality;
6. High Grade: Science and technology products, green energy, the use of units attached importance to science and technology, green image enhancement, grade promotion;
7. Less investment: one-time investment and alternating electricity equivalent (alternating current investment from power conversion, into electricity, control box, cable, engineering), an investment, long-term benefit;
8. Wide application: Solar energy from the natural, so there is always a place where the sun can be used, especially suitable for green landscape lighting, high-grade residential and outdoor lighting, scenic spots and coastal landscape lighting and embellishment, industrial development zone, mining industry, the street lamps, the major colleges and universities outdoor lighting.
Design of Solar Street lamp
Designers should be familiar with the design standards of lighting road in this part of design, and master the software of illumination simulation. According to the customer's design standards and requirements, select the appropriate lamp set to calculate the best reasonable installation method.
But often in the design process, according to the requirements of customer description simulation of the lighting results can not meet the requirements of customers, so in this link need designers and customers to fully communicate, and constantly update the perfect program.
3.1.1 Road information Import
According to the project information provided by the customer, import the road information
① Street Design Standard (European standard cie140/en13201 or American Standard ansi/iesnarp-8-00 standard) corresponding rank;
② Road Arrangement Mode (Lane, sidewalk, emergency road, turf, isolation, etc.);
③ Street Pavement-grade of covering layer, asphalt evenness moisture grade;
3.1.2 Lamp arrangement Information Import
According to the installation information provided by the customer, import the lamp arrangement information:
① Import the IES report of the selected luminaire;
② The arrangement oflamps (single row arrangement, double row intersection, double row opposite);
③ Lamp rod Arrangement (lamp installation height, lamp and face distance, each lamp rod lamp number, the distance between two lamp rods)
- New Technology Of Energy Saving And...
- Solar Lamps Lead Intelligent Life W...
- Development Trend Analysis Of Solar...
- Green Solar Lights Around You
- The Development Potentiality And Su...
- LED Solar Street Lamps For The Inst...
- The Future Development Of Solar Str...
- Rural Solar Street Lamps: For The L...
- Discussion On The Great Value Of So...
- LED Solar Lawn Lights Light Up The ...